Electric Guitar Tuning

You can find a slew of ways to tune guitars. If your electric guitar is strung correctly, tuning it can be a breeze. When you learn to tune a guitar, you will slowly become familiar as to the different notes and their sounds.

Your electric guitar needs to be tuned with a tuner that will work especially for it. Learning to tune a guitar by ear of by listening for a note by using another source will be of benefit. Your ears can be trained for the notes and their different pitches. This will also aid in finger placement and how much you are to press on each string when playing.

Tuning needs to begin with an A that is open and is the fifth string on the guitar. You can use another instrument to guide and help you tune your guitar. When the A chord is struck on another instrument, tune your guitar to that exact pitch or sound. First, lessen the string until it hits right beneath the tone and them bring the tension of the string tighter until it hits the same tone of the other instrument. Your guitar will stay in tune much longer if you remember to first loosen the strings and then tighten.

When that string is in tune you can then next start to tune the string label D and it is located right under the A. This is the string number four on the guitar. Tune the D string by finding the fifth fret which is A and placing your middle finger on the fret. This will then commence to tune the D string. Hold the fret down listen to the pitch as you strum it, all the while tuning the D string.

Next, comes the tuning of the G string and this string is found right under the D string and will be the third string on the guitar. Tune G in putting your finger to the fifth fret on string D. While keep your finger places on it, strum the string and while listening to the tone, tune G by setting the sound to it’s likeness.

B String will be the second string on the guitar. It is located right under the G string. Put your middle finger this time on the fourth fret, which is string G. Let the tone of the B string match the G’s sound.

Now, the string that is the slimmest and is found one beneath the D string should be tuned by putting your middle finger on the fifth fret of string B. There you have your high E note. Tune accordingly until the sound is similar.

Last but not least, is your lower E note. This will be the thickest of all the strings. While putting you middle finger once again on the fifth fret of low E it will make the sound of an A that is open. Similarly match tones of the A string to that of the fifth fret. You will need to play with the low E to match it in sound.

Keep in mind that a lot of creation of tension has put the strings under stress, however this does not pose a problem for the guitar. Make sure there are no stray pieces of wood that can cause a string to break. This can easily happen if you have not tuned the strings correctly and have tightened them too much. If this happens it can cause your guitar significant damage. If you are not sure if you have tightened them too much, lessen them until you find the correct tuning.

Also remember to only string the guitar working on one string at a given time. If you create more tension than is needed at a given time you can permanently bend the neck of the guitar, so be careful.

When the guitar has been tuned, it is normal to find that the strings have already proceeded to ink out of tune. Just go over the process once again as listed above as many times as it takes until they are all in the correct tune.

An electric guitar that has the proper tone will stay that way for longer periods until you will have to tune the guitar again. Sometimes the strings may be in perfect tone, but in hitting the tenth fret it may be halfway out of tone, better known as incorrect intonation.

Incorrect or bad intonation is linked back to how long the string is, and how the frets are spaced. It can also be chalked up to a string that is malformed, this mean a string that doesn’t keep its width the same the whole length of the string. The tones will be often mark this flaw by their pitches. You can move the correctly selected bridge piece of the guitar to allow adjustment of the string. Repeating of this on each string can throw a wrench in your time, but will prove to be time well spent.